Home   » Component data   » MOSFET data » this page

BSS138 Small Signal MOSFET

Data for the BSS138 small signal MOSFET including electrical parameters, maximum current and voltage, pin connections, package type and many other datasheet details.

These N−Channel enhancement mode field effect transistors have been designed to minimize on−state resistance while provide rugged, reliable, and fast switching performance.

These devices are particularly suited for low voltage, low current applications such as small servo motor control, power MOSFET gate drivers, and other switching applications.




Key details and performance parameters for the BSS138 MOSFET.


BSS138 MOSFET datasheet parameters & data
 
Parameters Details
Brief description Small signal 100V MOSFET
Package type SOT23
Operational mode Enhancement
Channel type N-channel
Drain to Source voltage VDS 50V
Drain to Source breakdown voltage V(BR)DSS) 50V min
Gate to source voltage VGS ±20V
Maximum drain current continuous ID 0.22A
Maximum drain current pulsed ID 0.88A @ 25°C
Gate threshold voltage VGS(th) 0.8V min, 1.3V typ, 1.5V max
Static drain source ON resistance RDS(ON) 0.7Ω typ, 3.5Ω max at 10V & 0.22A & 25°C
1.0Ω typ, 6Ω max at 4.5V & 0.22A & 25°C
1.1Ω typ, 5.86Ω max at 4.5V & 0.22A & 125°C
Forward transconductance gFS 0.12 min, 0.5 typ
Input capacitance 27pF typ
Output capacitance 13pF
Reverse transfer capacitance 6pF
TJ °C 150
PTOT 0.36W but derated above 25°C
Manufacturers On Semiconductor, Infineon

    Outlines & pinout:





Explanation of MOSFET parameters


Parameter Explanation
Operational mode This details whether the FET is an enhancement or depletion mode
Channel type The channel of the MOSFET can either be an N-type channel where electrons are the majority carriers or P-type where holes are the majority current carrier.
Drain to Source voltage VDSS This is the maximum voltage that can be sustained between the drain and source
Gate to source voltage VGSS This is the maximum voltage that can be sustained between the drain and the gate.
Maximum drain current continuous ID This is the maximum current that can be carried byt he device. Sometimes there may be a differentiation between the continuous and pulsed or peak values

Parameter Explanation
Zero gate voltage drain current IDSS This is the current carried by the device when the gate voltage is zero. The test conditions are normally stated for this.
Gate threshold voltage VGS(th) This is the minimum gate-to-source voltage, VGS required to create a conductive channel between the source and drain terminals
Static drain source ON resistance RDS(ON) This is the resistance of the device when turned on. The test conditions of voltage and current are normally given for this.
Drain source ON voltage VDS(ON) This is the voltage across the device when it is turned on. Again the test conditions are given.
Forward transconductance gFS Forward transconductance also given the letters gm is defined as the change in drain current (ΔID) for a small change in the gate-source voltage ΔVGS, with the drain-source voltage, VDS held constant.

These are the main MOSFET parameters that have been included in our list. There are others, but these are the main ones and they help quantify the main elements of the performance.

 

Read more about . . . . FET Specifications & Parameters.


Please note, that the data given is the best estimate we can give within a tabulated summary of this nature. Parameters also vary between manufacturers. Electronics Notes cannot accept any responsibility for errors, inaccuracies, etc, although we do endevaour to ensure the data is as accurate as possible.




Notes and supplementary information

 

  •   Availability & sources

The BSS138 is available from a number of stockists and electronic component distributors many of which are given in the table below.


BSS138 Component Distributor, Stock and Pricing

 


  •   Further details

The BSS138 is a widely used and widely available device that can be obtained at a good price from a variety of different distributors with the primary manufacturer being Infineon.

The device is a good al round small signal MOSFET ideal for switching circuit designs.

Ian Poole   Written by Ian Poole .
  Experienced electronics engineer and author.




    Return to Component Data menu . . .