LED History: story of the light emitting diode

The Light Emitting Diode, LED is well established in the electronics industry today . . but the LED history seemed fated as many attempts were unsuccessfully made to bring it to the world.

History of the Light Emitting Diode Includes:
LED history    

The history of the LED, light emitting diode dates back to some of the earliest days of wireless technology - a time when little was understood about semiconductors themselves and even less about the possibility of using them to generate light.

LEDs have been commercially available since the 1960s, but the LED history extends many years before this. The LED took many years to develop for a number of reasons - the first discoveries were well ahead of their time, other discoveries were lost as a result of war. It was only when the allied technologies were sufficiently mature that the LED could be fully developed and marketed.

Even after the first devices appeared, LED history was not finished - new developments have been made and LEDs are addressing new markets, never really envisaged before.

Note on Light Emitting Diode Technology:

Light emitting diodes are widely used in many areas of technology. There are many types of LED, but the traditional inorganic types used compound semiconductors to emit light. Today many different colours are available and the technology has enabled them to be used for everything from panal indicators to displays and backlights to domostic and automotive lighting.

Read more about Light emitting diode, LED technology

 Light emitting diode, LED circuit symbol
Light emitting diode, LED circuit symbol

Early LED history

The first recorded effects of the light emitting diode effect were noticed back at the beginning of the twentieth century. A British radio engineer named H J Round who working for Marconi undertook some experiments using crystal detectors. At the time radio detectors were one of the major limiting factors within the early wireless of radio sets. He was a very talented engineer and helped advance the science of radio in many ways.

Captain H.J. Round pioneer of LED history
Captain H J Round was the pioneers of the LED history and the first person to notice the LED effect
Image courtesy Marconi plc

The early detectors were often made using crystals of what we would call semiconductors. A thin wire was placed onto the surface and a point contact diode was made. These were called "Cat's Whiskers" for obvious reasons.

Crystal detector / cat's whisker detector | www.electronics-notes.com
Typical crystal detector / cat's whisker detector

In trying to investigate the effects and improve their performance, Round had passed a current through some of his detectors. He noted that one of them emitted light when a current was passed through it. Although he did not understand the mechanism for the effect, he published his findings in 1907 in a magazine of the day named Electrical World.

To the Editors of Electrical World:
  Sirs:- During an investigation of the unsymmetrical passage of current through a contact of carborundum and other substances a curious phenomenon was noted. On applying a potential of 10 volts between two points on a crystal of carborundum, the crystal gave out a yellowish light. Only one or two specimens could be found which gave a bright glow on such a low voltage, but with 11 volts a large number could be found to glow. In some crystals only the edges gave the light and others gave instead a yellow light, green orange or blue. In all cases tested the glow appears to come from the negative pole, a bright blue-green spark appearing at the positive pole. In a single crystal, if contact is made near the center with the negative pole, and the positive pole is put in contact at any other place, only one section of the crystal will glow and that the same section wherever the positive pole is placed.

  There seems to be some connection between the above effect and the e.m.f. produced by a junction of carborundum and another conductor when heated by a direct or alternating current; but the connection may be only secondary as an obvious explanation of the e.m.f. effect is the thermoelectric one. The writer would be glad of references to any published account of an investigation of this or any allied phenomena.

H. J. Round

LEDs investigated by Losov

The history of the LED shows the idea remained dormant for many years. Then it was observed again by a Russian engineer named Oleg Vladimirovich Losov. He was the son of a Russian Imperial Army Office - born into a noble family. This would have counted against him in the post revolution Russia era.

Losov has attended a number of university lectures but never undertook any formal university education, but instead was a technical at the Leningrad Medical Institute.

Losov made some major advances and is a key person in the LED history. He undertook a considerable amount of work investigating light emission from Cat's Whisker style detectors. He observed and investigated the light emission from zinc oxide and silicon carbide crystal rectifiers.

As a result of his observations and investigations, Losov published a number of papers in the technical press of the day between 1924 and 1930. His first paper was entitled: "Luminous carborundum detector and detection crystals" which was published in a Russian journal. Soon he published his findings in other British and German. Losov detailed a variety of aspects of these diodes including the spectra of their light emission as well as many other aspects of their operation. In one article published in the Philosophical Magazine in 1928 he detailed the I-V characteristics of a carborundum diode along with the onset of light emission. This formed part of his work on investigating the nature of the diode emission - recognising it was not a thermal effect, but arising from the semiconductor action.

In further work, Losov investigated the temperature relationships of the effect, cooling the semiconductors down to very low temperatures. He also modulated the LED to see the effects of frequency of any current applied to the diode.

Losov went on to investigate further ideas associated with diode and what would alter be called semiconductor technology. Sadly though, he lived in Leningrad and he was killed during the siege of Leningrad during the Second World War. He had published a total of four patents between 1927 and 1942, but all this work was lost as records were destroyed in Leningrad.

LED history: semiconductor technology advances

During the Second World War, radar was seen as a major enabler. Accordingly a large amount of development of practical devices was initiated. This utilised much of the materials science work that had been undertaken in the 1920s and 1930s.

As a result of the work new point contact diodes were developed. These were able to provide better performance than thermionic valve / vacuum tube diodes. As a result of the research into semiconductor diodes, the idea for the light emitting diode re-surfaced in 1951. This time work was to be more successful, although it took some years to reach completion. One research team was lead by Kurt Lehovec. He applied for a patent in 1952 for Silicon carbide diodes that emitted light. However this was only the first phase of the work that was needed.

Following the work by Kurt Lehovec, others also started to work on LED technology. The work took many years and involved a number of companies and researchers. Even Shockley became involved.

Although LEDs did not become commercially available for a number of years, several people made some significant discoveries and improvements. Lehovac himself investigated introducing different impurities to change the colour of the light making blue, green/yellow, and pale yellow from different combinations.

Also researchers working at RCA patented a green LED in 1958. All of these LED developments added more to LED technology, furthering the technology within the overall LED history.

Commercial LED history

The first commercially available LEDs started to appear in the late/mid 1960s. These LEDs early LEDs used a semiconductor made using gallium, arsenic and phosphorus - GaAsP. This produced a red light, and although the efficiency of the devices was low (typically around 1 - 10 mcd at 20mA) they started to be widely used as indicators on equipment.

One of the first companies to manufacture LEDs on any scale was Monsanto. Monsanto was actually a company supplying the raw semiconductor materials. They had aimed at working with Hewlett Packard - then a test equipment company - with Monsanto supplying the semiconductor and Hewlett Packard manufacturing the diodes. However the relationship did not work out and Monsanto ended up developing the LEDs themselves. [The name of Monsanto is not seen today. The business was sold in 1979 to General Instrument.]

With the original GaAsP devices being manufactured, the next development saw gallium phosphide devices developed. GaP devices were not widely used because the light they produced was at the far end of the red spectrum where the sensitivity of the human eye is low, and even though they produced a high output, the human perception was of a dim light.

 Light emitting diode, LED circuit symbol with outline shapes
Alternative light emitting diode, LED circuit symbol

High output LED lamps

One of the next stages in the LED history was the development of high brightness LEDs. As LEDs were developed, the light levels increased to the extent that they could be considered for applications outside simple indicator lamps. By 1987 the Hewlett Packard AlGaAs (aluminium gallium arsenide) diodes being produced were bright enough for the first applications within lighting. The first applications for these diodes was within the automotive industry where red LEDs were used for vehicle brake lights, and also for traffic lights. Here the use of LEDs was of particular interest because of their increased reliability over the incandescent lights that had been previously used.

A year after the first AlGaAs LEDs were introduced another variant, AlInGaP (aluminium Indium Gallium Phosphide) were manufactured. These LEDs gave a significant improvement over the previous AlGaAs diodes by doubling the light output.

Later, in 1993 HP started to use GaP (gallium phosphide) to provide high output green LEDs. Also further developments of this technology allowed the production of high output orange lamps. These were ideal for use as car direction indicators - again their reliability in being turned on and off as well as their efficiency proved to be a major improvement.

LED history continues

With the increasing use of LEDs as a result of their high efficiency and many other advantages, the history of the LED did not finish. It is still very much an on going story. New developments are being made and LED technology is continuing to move into new areas with the development of organic LEDs and for their use with lighting.

In several years from now, it will be seen that the LED history has moved on and will continue to move on for many years to come.

More History:
Radio history timeline     History of the radio     Ham radio history     Coherer     Crystal radio     Magnetic detector     Spark transmitter     Morse telegraph     Valve / tube history     Transistor     Integrated circuit    
    Return to History menu . . .